STEM- versions for CASTORS of the FMF- Series
Different types and sizes for our complete FMF-Castor-Series
|
Which way do you prefer to assemble the castor with the chair / furniture / where-you-use-it ? Three possibilities, with or without a castor neck. Availibilty depends on specific castor (wheel diameter).
|
TOP PLATE STEM
A stem to put it into the connector of the wheel and a top plate to connect the wheel with the chair / cabinet / etc. The top plate is not moveable. You need 4 screws to mount the top plate stem on the furniture. 2 sizes available.
| |
#A |
#B |
| PT42 |
42 |
32 |
| PT502 |
50 |
38 |
| all measures are mm. |
|
|
BOLT STEM
A stem to put it into the connector of the wheel and a screw thread on the top. To mount the castor with this system you need a hole in you furniture and nut / washer on the inside. Screw thread for M8 or M15 nuts.
| |
#A |
#B |
Screw |
| T83 |
8 |
15 |
M8 |
| T14 |
10 |
25 |
M10 |
| all measures are mm. |
|
|
FRICTION RING STEM
To use a friction ring stem you need a matching plug socket on the opposite side. The friction ring will hold the connection. Available for plug sockets with an diameter of 11mm.
| |
#A |
#B |
| F22 |
11 |
22 |
| all measures are mm. |
|
|
CASTOR NECKS
Castor necks are available in 3 different colors / designs:
(BK) => Black
(YY) => Gray
(SV) => Silver Coated
| |
#A |
Wheel Ø |
| 75CN60 |
60 |
75 (FMF75) |
| 75CN42 |
42 |
75 (FMF75) |
| 60CN38 |
38 |
60 (FMF60) |
| all measures are mm. |
|
|
|
© 2012 DesignHardware Europe b.v. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
|
web design by...
|
